Products

LP8 pin headers

A miniature CO₂ sensor module for battery-powered applications. A wide supply voltage range enables a variety of battery options.

Defining attributes

Miniature size
Adjustable ABC period
Low power consumption
Variety of battery options

Senseair LP8 is a miniature sensor module which targets battery-powered applications. It gives customer a full control on sensor integration into a host system, flexibility in changing of the CO₂ measurement period and consequently power consumption. One measurement requires only 3.6mC of charge (or energy 11.9mJ at 3.3V battery supply). The sensor is supposed to be switched off between measurements to minimise power consumption. A wide 2.9 to 5.5V supply voltage range enables long duty if sensor is powered from three alkaline 1.5V batteries. A compact alternative is to power sensor from a single 3.6V Li-SOCl2 battery. The LP8 provides a communication protocol which allows customer changing measurement period on the fly and control ABC (Automatic Baseline Correction) period. Background- and zero calibrations are implemented.

Article number	005-0-0001
Operating principle	Non-dispersive infrared (NDIR)
Measured gas	CO₂
Measurement range	0–10 000ppm
Accuracy	±50 ppm CO2 ±3 % of reading
Operating range RH	<85 % RH
Operation range °C	<50 °C
Warm-up time	TBA
Response time	TBA
Power supply	2.9 - 5.5 V
Peak current	125 mA
Average current	31 μA
Communication	Modbus protocol, UART
Outputs	TBA
Compliance
Maintenance	A host system counts ABC (Automatic Baseline Correction) period itself and has to write ABC command to the Calculation control byte when ABC period (eight (8) days) expires.
Life expectancy	> 15 years
Dimensions	33.5 x 19.9 x 12.5 mm (L x W x H)
Weight	8 g
Storage conditions	-40 – 70°C