Products

Aercast

Senseair Aercast is an advanced and versatile 3-in-1 IAQ monitor. It measures CO₂ concentration, temperature and humidity in the ambient air. The measured parameters are conveniently combined into one common indicator – the Senseair Index – describing how your performance is affected by the ambient air. Research shows that the air around us significantly affects our health and performance. Aercast puts you in control of the surrounding environment and secures your top performance.

Defining attributes

Maintenance free
3 sensors in one housing
Battery-powered
IoT connected using the market’s leading radio interfaces
IAQ indication on display as well as intuitive LEDs
Available as a white-label product

Thanks to the ultra-low power sensor, the Senseair Aercast is possible to run on batteries for at least 2 years, depending on the actual configuration.

The measured data is shown on a high resolution display and the overall indoor air quality is intuitively indicated by the stylish LED elements. The data is wirelessly transmitted using an open protocol and can be viewed using a laptop dashboard or a smart phone app.

Senseair Aercast is provided as a white-label product that could be branded with your own logotype. The product complies with ASHRAE standard 189.1 (±50 ppm @ 1000 ppm of measured CO₂ value).

Note 1: Except battery replacement, no maintenance required in normal indoor air as ABC (Automatic Baseline Correction) is used.

Article number	007-0-0007
Operating principle	Non-dispersive infrared (NDIR)
Measured gas	CO₂
Measurement range	0–5000ppm
Accuracy	±30 ppm ±3 % of reading
Operating range RH	<100 % RH
Operation range °C	<50 °C
Warm-up time	TBA
Response time T90	TBA
Power supply	TBA 2x A Li-SOCI2 batteries (included)
Peak current
Average current	TBA
Communication	Bluetooth LE
Outputs	TBA
Compliance	TBA
Maintenance	TBA
Life expectancy	>15 years (battery 2 years)
Dimensions	148 x 58 x 29 mm (L x W x H)
Weight	TBA
Storage conditions	TBA