Products
| Article number | 099-16-0004 |
| Operating principle | Non-dispersive infrared (NDIR) |
| Measured gas | CO₂ |
| Measurement range | 0–20 000 ppm |
| Accuracy | ±300 ppm ±3% of reading |
| Operating range RH | <95 % RH |
| Operation range °C | <50 °C |
| Warm-up time | <60 s |
| Response time | <60 s |
| Power supply | 15 - 30 V |
| Outputs | Linear analogue voltage output |
| Maintenance | Periodical calibration |
| Life expectancy | >10 years |
| Dimensions | 38 x 38 x 46 mm (L x W x H)1 |
| Storage conditions | -40–60 °C |
| Average power consumption | <1 W |
- Without connector
Product Sheet & Specification
Product Compliance
- Statement on EU REACH Regulation 1907/2006
- Senseair Conflict Minerals Statement
- Declaration on California Proposition 65
- Declaration of Conformity, S9
Documentation
Calibration Certificate
What is Senseair S9 CO₂ 2%?
Senseair S9 CO₂ 2% is an enclosed NDIR carbon dioxide sensor with internal heating for condensation prevention. It measures 0–20 000 ppm CO₂ and provides a linear 0–5 V output for integration into agricultural and industrial control systems.
What applications is S9 CO₂ 2% designed for?
S9 CO₂ 2% is designed for egg incubators and hatchers, poultry and livestock buildings, mushroom growing rooms, greenhouses and industrial monitoring equipment. Its protected construction and serviceable design support installations where dust, humidity and regular cleaning are part of the operating environment.
Why use S9 CO₂ 2% in egg incubators and hatchers?
Egg incubation and hatching require ventilation to follow changing conditions throughout the production cycle. S9 CO₂ 2% provides CO₂ feedback to compatible controllers, with protected electronics and a removable sensor body that simplifies replacement between production cycles.
Why use S9 CO₂ 2% in mushroom growing rooms?
Mushrooms release CO₂ as they grow. Ventilation needs to remove that build-up while maintaining the temperature and humidity required by the crop. S9 CO₂ 2% provides CO₂ feedback through its 0–5 V output. Its internal heating element is designed to prevent condensation inside the sensor.
What makes S9 CO₂ 2% suitable for demanding environments?
S9 CO₂ 2% combines a protective housing, epoxy-encapsulated electronics and an internal heating element designed to prevent condensation inside the sensor. A replaceable outer-filter cover supports servicing. The sensor has IP65 protection with the specified protective cover fitted, which must be used during cleaning.
Does S9 CO₂ 2% require maintenance?
S9 CO₂ 2% requires periodic zero calibration. Fit the protective cover during cleaning. If the outer filter is damaged, replace the green cover that carries it. If the inner filter is damaged, replace the sensor.
Does Senseair S9 CO₂ 2% have an internal heating element?
Yes. Senseair S9 CO₂ 2% contains an internal heating element designed to prevent condensation inside the sensor. Installation and operation must follow the temperature and humidity limits in the product specification.























